|
Application Note
|
PDF
|
|
Tutorial on Clock and Data Recovery Products
|
|
|
Tutorial on OCXO's - Oven Controlled Crystal Oscillators
|
|
|
Tutorial on VCXO's and VCO's - Voltage Controlled Crystal Oscillators and VCOs
- Voltage Controlled Oscillators. Non-Crystals
|
|
|
Tutorial on TCXO's - Temperature Compensated Crystal Oscillators
|
|
|
Tutorial on Clock Oscillators
and Non-Compensated Sinewave Crystal Oscillators
|
|
|
Tutorial on Phase Noise
|
|
|
Jitter in Clock Sources
|
|
|
Typical Phase Noise Performance for the VS-705 Series
|
|
|
Typical Jitter and Phase Noise Performance for the VC-710 series
|
|
|
Typical Phase Noise Performance for the VC-800 series
|
|
|
Typical Phase Noise Performance for the V-Type series
|
|
|
RSM Jitter Calculation and Comparison for the VS-500, VC-400, J-Type,
XO-500, and XO-400
|
|
|
Jitter Calculation for the VCO600A/VS500@622.080, sub 1 pS in the 12kHz to 20MHz range.
|
|
|
Jitter Calculation for CO-600V VCXO, sub 1 pS in the 12kHz - 20MHz band
|
|
|
Typical Phase Noise Performance for the VCC1 series
|
|
|
Typical Phase Noise and Jitter Performance for the VCC4 series
|
|
|
Typical Phase Noise Performance for the VCC6 series
|
|
|
Typical Phase Noise Performance for the VTC4 series
|
|
|
Typical Phase Noise and Jitter Performance for the VVC1, VVC2 series
|
|
|
Typical Jitter Performance for the VPA1, VPC1, VPE1
|
|
|
Comparing Vectron’s Crystal-Based PECL Oscillator with a SAW-Based Equivalent
|
|
|
A comparison of 125MHz CMOS oscillators: Crystal versus SAW technology
|
|
|
CD-700 A Quartz Stabilized PLL
|
|
Using Loop Filter Software for the TRU-050 & Loop Filter Program
Download Loop Component Selection & Simulation Software
|
|
CD-700/TRU-050 Code Mark Inversion (CMI) Input Data
by Jan Yang and Dave Lane
|
|
|
Reducing Power Consumption on LVPECL XO, VCXO’s
|
|
|
Automated Production Testing for the V/S/R types and TRU050 Products
|
|
|
Definition of Absolute Pull Range
|
|
|
Using the TRU600 in CMI Applications
|
|
State-of-the-art in the design and manufacture of Low Acceleration
Sensitivity Resonators.
R. Haskell, J. Buchanan, P. Morley, D. Desai, M. Esmiol, M. Martin, and D. Stevens
|
(poster)
(paper)
|
|
Packaging Design & Manufacture of High Temperature Electronics
Module for 225°C Applications utilizing Hybrid Microelectronics
Technology by Jacob M. Li
|
|
High Q, precision SC cut resonators with low acceleration sensitivity Technical paper
by P. Morley, R. Haskell and D. Stevens
|
|
Method for measurement of the sensitivity of crystal resonators to repetitive stimuli Technical paper
by P. Morley and R. Haskell
|
|
|
"QUARTZ CRYSTAL RESONATORS AND OSCILLATORS" by John Vig
|
|
|
SAW-Based Frequency Control Product Applications
|
|
|
Analysis of the Effects of Mounting Stresses
|
|
|
Three Dimensional Finite Element Modeling
of Quartz Crystal Strip Resonators
|
|
|
Finite Element Modeling of the Effects of Mounting Stresses
on the Frequency Temperature Behavior of Surface Acoustic Wave Devices
|
|
|
EX-380/385 Series (EMXOTM) Application Note
|
|
|
Evacuated Miniature Crystal Oscillators (EMXOTM)
|
|
|
PECL Load Oscillator
|
|
|
Crystal Glossary
|
|
|
Oscillator Glossary
|
|
|
Quality and Reliability Report
|
|
